Chicago Press Brake
This brake press is most often used for auxiliary functions. It is commonly set up with flattening dies to press tight hemmed edges. It is also used for one-strike applications, such as the drip edges on the bottom of coping systems. The Chicago can also be fitted with a gang punch that is used for punching pressure bar and other materials.
Model Number: |
1012-R |
---|---|
Standard Tolerance: |
1/32” |
Material Processing Capability
Material |
Thinnest |
Thickest |
---|---|---|
Aluminum (3003 H14) |
.025 |
1/4” |
Galvanized Steel |
28 GA |
12 GA |
Stainless Steel |
28 GA |
12 GA |
Bending Capabilites (3003-H14 Aluminum)
Material Thickness |
Smallest Leg |
Largest Leg |
---|---|---|
.025-.040 |
5/16” |
25” |
.050-.063 |
5/16” |
25” |
.080-.090 |
1/2” |
25” |
0.125 |
1/2” |
25” |
0.187 |
5/8” |
25” |
0.250 |
7/8” |
25” |